Mettur Dam Water Level at 92.01 Feet, Inflow Exceeds Discharge

The water level at the Mettur Dam stood at 92.01 feet, against the full reservoir level of 120 feet, as authorities continued to monitor the storage position of the Stanley Reservoir. The dam recorded an inflow of 10,089 cusecs, while the discharge was maintained at 7,000 cusecs. The latest figures indicate that the reservoir remains significantly below its maximum level, with the balance between inflow and outflow being closely watched by officials.

The inflow of 10,089 cusecs represents the quantity of water entering the reservoir through the Cauvery river system. Since inflows can vary depending on rainfall and water movement in the upstream catchment areas, the figure is an important indicator for managing the reservoir. Officials regularly track these changes to determine how much water can be retained in the reservoir and how much needs to be released for downstream requirements.

At the same time, 7,000 cusecs of water was being released from the dam. The discharge is important for meeting water requirements downstream, particularly for agricultural areas that depend on the Cauvery system. The difference between the inflow and discharge means that, at the time of the latest measurement, more water was entering the reservoir than was being released from it.

Also Read: CM Vijay Releases Cauvery Water From Mettur Dam, Calls It Tamil Nadu's Right

Mettur Dam is a major water storage and irrigation facility in Tamil Nadu and has a central role in regulating Cauvery water for downstream regions. Water released from the reservoir supports agricultural activities across parts of the Cauvery delta, where farming depends heavily on the availability and timing of river water. Consequently, changes in the dam's storage level are closely followed by farmers, irrigation authorities and other stakeholders.

With the reservoir level at 92.01 feet, the dam was 27.99 feet below its full reservoir level of 120 feet. The storage position can change considerably depending on the volume of water flowing into the reservoir and the quantity released downstream. Rainfall in the Cauvery basin, upstream water releases and irrigation requirements are among the factors that can influence the reservoir's daily readings.

The latest figures therefore provide a snapshot of the water position at Mettur Dam, with the reservoir receiving 10,089 cusecs and releasing 7,000 cusecs. Continued monitoring will be necessary as inflows and downstream requirements change. The reservoir's storage level will depend on how these factors evolve, while the discharge will continue to be regulated according to water requirements and prevailing conditions in the Cauvery basin.

Also Read: CM Vijay to Open Mettur Dam Gates On September 1 Amid Cauvery Row